December 15, 2004
Contents:
1) How to
run
3) GUISDAP
analysis: arc1 and tau2pl at STEL
@@@@@ 4) Analysis of CP-2
data
-------------------------------------------------------------------------------------------------------
At
EROS4 terminal
(1) To check what is going on.
printexp
@@ printant
@@ kir printexp
@@ sod printexp
(2) Then start experiment
runexp
/kst/exp/tau2pl/tau2pl 16:00 cp2 NI
sod runexp
/kst/exp/tau2pl/tau2pl 16:00 cp2 NI
kir runexp
/kst/exp/tau2pl/tau2pl 16:00 cp2 NI
*** Ask an engineer to
power TX on ***
enablerec
sod enablerec
kir enablerec
at matilda@ (ssh tana)
guisdap –a
@@@@ result path = /analysis/results/AUTO
display 0 0 0 1 1
(4)
Data
Data are stored as follows:
(off
course, names changed following experiment name.)
Tromso:@ matilda /data/tau2pl_u_cp2_1.10HF_NI@uhf /
Kiruna:@
k2501:/data1/tau2pl_r_cp2_1.10_NI@kir
Sodankyla:
s2501:/data1/tau2pl_r_cp2_1.10_NI@sod
-------------------------------------------------------------------------------------------------------
2) Make a summary plot
(1) make filelist.dat
shcpu1:/EISCAT00/nozawa/gup1@
or sh2:
/EISCAT01/arc1
@@@@@@@ make_filelist.pro;
zmake
(2) draw a figure
shcpu1:/EISCAT00/nozawa/vizu
@@@@@@@ config_vizu.m;
vizu
-------------------------------------------------------------------------------------------------------
3) GUISDAP analysis: arc1 and tau2pl
sh2: /EISCAT01/arc1@ (and
/EISCAT01/tau2pl_103km)
@ an_tau2pl.m (or similar ones)
@ ./guisdap
result
data: /EISCAT08
make_filelist.pro
write_ascii_tau2pl.m
-------------------------------------------------------------------------------------------------------
4) Analysis of CP-2 data
(1)
make it a binary file
@ /EISCAT04/nozawa/DAT
@@@ dateguisdap
@@@@@@ t
@@@@@@ 041209
@@@@@@ no
@@@@@@ cp2e@@@@ (<-- currently gcp2eh used)
@@@@@@ /EISCAT08/041209_100km_100/
@@@ make_bi_guisdap_5.pro (dateguisdap)
@@@ zbi5
@@@ rename file properly:@
@@@ mv tr041209cp2e_100km_100.gdat5 tr
041209cp2t_100km_100.gdat5
@@@ copy files to /EISCAT00/wind
(2)
calculate 3-D velocity
@ /EISCAT00/wind
@ mono.date
@@@@ 041209
@@@@ _100km_100
@@@@ cp2t
@@@ .gdat5
(3)
draw a figure of 3-D ion velocity
@ plot_vmono_gup.pro
@ if it is a new experiment, edit cplist.pro
and set_cp_time.pro
(4)
calculate E-field and draw a figure
@ cal_Emono_gup.pro
@ plot_Emono_gup.pro
(5)
calculate wind velocity
@ DATA:
@@@ /EISCAT05/geodata
@@@ /EISCAT08/nden
@@@ /EISCAT05/MSISnozawa
at
/EISCAT05/MSISnozawa
@@ msden1.date
@@ msden1
@@ msden_make_bi.pro
at@@ /EISCAT00/wind
@@ cal_umono_gup.pro
@@ plot_vmono_gup.pro