% Configuration file for vizu
% For auto-scale, comment the corresponding line(s)
% Philippe Gamet - EISCAT Group 96/10/07
%%%%%%%%%%%%%%%% Source %%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%
DATA_PATH = '/ESR11/tau0/tony/test_results/';
DATA_PATH = '/EISCAT00/980921/tromso/';

WHICH_PARAM = 'Ne Te Ti Vi';	% Select parameters to plot
%WHICH_PARAM = 'Ne';		% Select parameters to plot
%%%%%%%%%% Time scales %%%%%%%%%%%%%%%%%% (Comment for auto-scale) %%%%
% Please use the following form:	[ YY MM DD HH MM SS ]
START_TIME      =       [ 1998 9 21 10 00 00 ];
END_TIME        =       [ 1998 9 25 18 00 00 ];

%%%%%%%%%%% Color scales %%%%%%%%%%%%%%%%% (Comment for auto-scale) %%%%
%NE_SCALE2		= 'linear';     % 'log' or 'linear' scale
NE_SCALE2		= 'log';        % 'log' or 'linear' scale
NE_SCALE 		= [10.0 12.0];	% Scale for Ne (Log10)
%%NE_SCALE 		= [10.0 30.0];	% Scale for Ne (/10^10)
TE_SCALE		= [0 4000];	% Scale for Te (K)
TI_SCALE		= [0 3000];	% Scale for Ti (K)
VI_SCALE		= [-200 200];	% Scale for Vi (m/s) for 42m
%VI_SCALE		= [-600 600];	% Scale for Vi (m/s) for 32m
%%%%%%%%%% Y-Axis scales %%%%%%%%%%%%%%%% (Comment for auto-scale) %%%%
Y_PARAM	= 'Altitude';			% Y-Axis parameter
%Y_PARAM		= 'Range';			% Y-Axis parameter
ALT_SCALE		= [80 600];	% Scale for Altitude (km) for 42 m
%ALT_SCALE		= [80 600];	% Scale for Altitude (km) for 32 m

%ALT_SCALE		= [150 600];	% Scale for Altitude (km)
%RAN_SCALE		= [80 200];	% Scale for Range (km)
%LAT_SCALE		= [65 78];	% Scale for Geog. Latitude (deg)
%%%%%%%%%%%%%%%% Plot options %%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%
%GATES	= [1:19 61:81];	% Which gates to plot (Comment to plot all gates)
% Use 'test' option to help decide which gates to plot 
PLOT_STATUS	= 0;
% 0 --> Do not plot if no fit is done OR if the maximum number of 
%       iterations is exceeded (i.e. plot only 'fit ok' data)
% 1 --> Do not plot if no fit is done because data too noisy
%       (i.e. plot 'fit ok' & 'max iter' data)
% 2 --> Plot all data ( status 'ok', 'max iter' or 'no fit')
%
% 3 --> Do not plot if each errors is out of the following values,
NEERR_SCALE 		= [0 11.0];	% limitation of Neerr (Log10)
TEERR_SCALE		= [0 1000];	% limitation of Teerr (K)
TIERR_SCALE		= [0 1000];	% limitation of Tierr (K)
VIERR_SCALE		= [0 200];	% limitation of Vierr (m/s)

%%%%%%%%%%%%%%%% Beam positions %%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%
%limit_az_el = [-360 360 87 93 1]; % position 1 = (AZ: 180, EL: 90)
%limit_az_el = [ 175 185 79 85 1]; % position 2 = (AZ: 180, EL: 82)
%limit_az_el = [ 167 177 60 66 1]; % position 3 = (AZ: 172, EL: 63)
%limit_az_el = [ 139 149 64 70 1]; % position 4 = (AZ: 144, EL: 67)

% If you like to plot data toward only one direction, 
% put limit_az_el = [minimum_AZ maximum_AZ  minimum_EL maximum_EL FILL]
% (Comment to plot all position data).
% FILL = 0 -> Do not fill in blanks.
% FILL = 1 -> Fill in blanks.
%%%%%%%%%%%%%%%% PRINT FIGURE %%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%

auto_print  = 1;  
% If you like to print a figure automatically, put 1 (else 0). 
print_name  = 'idl.ps';

% If you like to print a figure automatically, put print_name. 

background  = 1;  
% If you don't want to see figure, put 1 (else 0).
%%%%%%%%%%%%%%%% Other options %%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%
TIME_TICKS	= 30; 		% Maximum number of time ticks to print
MESSAGE1        = 'CP-2-E on September 21, 1998'; % Main: top
MESSAGE2        = 'KST UHF antenna'; % top; small left
MESSAGE3        = 'shcpu1:/EISCAT00/980921'; % bottom (left)
MESSAGE4        = 'Made at STEL on Feb 19, 2001'; % bottom (right)

LOCATION        = 'STEL'; % Location where plotting performed
